Elongated Refillable Cartridges for BROTHER LC101, LC103, LC105, LC107, LC109

Product packaging may vary.

Elongated Refillable Cartridges for BROTHER LC101, LC103, LC105, LC107, LC109

These four huge refillable cartridges with auto-reset chips for BROTHER LC101, LC103, LC105, LC107 and LC109 allow you to refill very infrequently.

Our refillable cartridges were created to simplify the refilling of BROTHER printers. Refilling InkPot's refillable cartridges is as easy as counting one, two, three. 1- Remove the cap. 2- Inject ink. 3- Replace the cap. That's all!

The cartridges can contain up to 100ml of black ink or 70ml of colour ink which means refills won't be too frequent.

These cartridges come with auto-reset chips. When the ink level indicated by your printer is low, by removing and reinstalling the cartridge, a full level will be shown.

Note that the cartridges are transparent, so you can always see the actual ink levels.

NOTE REGARDING THE PRINTER'S DOOR

If you have a MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW or MFC-J4710DW printer:
For these extra-long cartridges to fit into the printer, the door must be removed. This is very easy. Our instructions will show you how. Once the door has been removed, you can install the included door clip. This clip will activate the door sensor so that the printer can print even with the door removed. For those who would rather not remove the door, see our small refillable cartridges.

For any other printer model:
For these extra-long cartridges to fit into the printer, the door must be removed. This is very easy. Our instructions will show you how. To print even with the door removed, you will need to activate the door sensor. A Phillips screwdriver, a 4 inch nail, or even a brown plastic coffee stirrer all can activate the sensor. See the photo on the right. Our instructions will show you how to find the sensor. Note that we also sell small refillable cartridges that fit inside the printer normally with the door closed as usual.

The refillable cartridges installed in the printer.

The cartridges supplied with this product are empty. You will also need to purchase an ink refill kit for BROTHER printers.

This product contains the following:

100ml black refillable cartridge with auto-reset chip
70ml cyan refillable cartridge with auto-reset chip
70ml magenta refillable cartridge with auto-reset chip
70ml yellow refillable cartridge with auto-reset chip
4 air filters
Door clip (MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW printers)
Easy and detailed instructions with pictures

For those who do not want the cartridges stick out of the printer, we sell small refillable cartridges that can fit inside the printer normally.