The toner is specifically made for the Q2610A (10A), Q6511A (11A) and Q6511X (11X) cartridges. (HP 2300 and other printers)

Refilling laser cartridges is actually quite easy. Our instructions will guide you step by step.

With this kit, you can reuse your expensive laser cartridge for huge $$$ savings. In addition, reusing your cartridge is an environmentally-friendly choice.

NOTE: The refilling procedure requires making a few holes in the cartridge. An electric drill is not recommended; it is much easier and highly recommended that you use our specialized toner holemaking tool.

The Q2610A (10A), Q6511A (11A) and Q6511X (11X) cartridges have a chip that indicates the toner level. If you do not replace this chip, the printer will always tell you that your cartridge is "empty". The printer will work without a new chip, but it will be impossible to know the level of toner. It is recommended to change this chip every time you refill. See "Reset Chips".

Each laser refill kit contains the following:

• 2 300g bottles of black toner
• One funnel-shaped cap
• Aluminum tape
• Easy and detailed instructions

Visit us!

4480A, Grande-Allée
Boisbriand, QC